Flipper Zero
HARDWARE NOT ASSESSED Flipper Devices · Sub-GHz · RFID · NFC · Infrared
Project site ↗ Handheld multitool whose built-in CC1101 transceiver receives and transmits across the 300 to 348, 387 to 464 and 779 to 928 MHz sub-GHz bands, the everyday field radio for reading, saving and replaying garage/gate/doorbell remotes and other fixed-code devices, with no laptop or SDR. OOK/ASK and (G)FSK; its Read mode decodes known protocols and Read RAW captures unknown ones for later replay.
Lifecycle not assessed: nobody has checked yet whether this tool is still maintained, sold or working. Check the project's own page before relying on it.
COMPATIBLE SOFTWARE & PROJECTS
The open-source firmware that runs the Flipper Zero's Sub-GHz app: Read (decode a known protocol), Read RAW (capture an unknown signal as raw timings), Save and Send (replay/emulate a saved signal), and a manual virtual-remote builder. The official firmware deliberately refuses to save or replay rolling-code signals (e.g. KeeLoq) as a built-in safety limit, capture-and-replay works on fixed-code devices, not rolling-code ones, on stock firmware.
USED IN THE WAYFINDER